We recommend 29 March 2016

How to manage waste in construction?

The construction sector generates large amounts of waste ranging from soil and debris, cleaning and maintenance materials in certain cases toxic and dangerous. Poor waste management can be a source of water, soil and air pollution, as a result of the leaching of polluting substances through the waste.

Construction and demolition waste (DRC): Those that originate in the processes of material execution of construction works, both new plant and rehabilitation or repair and of dismantling, dismantling or demolition operations of buildings and installations that are included in category 17 of the European Waste List approved by the Order MAM/304/2002.


The bases for adopting good environmental practices in waste management are concentrated on the following:

— Reduce: Avoid excessive consumption of products, especially those that generate waste that is difficult to recycle.
— Recycle: Subjecting used materials or waste to a process of transformation or utilization so that they can be used again.
— Reuse: Make use of a product used for the same purpose for which it was originally made.
— Disposal: Process aimed at a dumping of waste or total or partial destruction without endangering human health or using methods that may cause harm to the environment.
— Valorize: Taking advantage of the resources contained in waste without endangering health or using methods that can cause damage to the environment.
— Minimize: Adopt measures to reduce the quantity and danger of the polluting products generated (waste and emissions to air or water) that require final treatment or disposal.


GOOD PRACTICES

Minimization and reuse in waste generation

Waste that can be reused:

— Concrete: Use as gravel in the manufacture of concrete. Use as a base on road pavements or as a filler on the construction site.
— Asphalt: Use as a filler on the construction site.
— Topsoil and excavation: Use for landscape recovery. Use as a filler in the work.
— Factory products: Take advantage of small pieces and do not discard them (tiles, tiles...). Use as a base on road pavements or as a filler on the construction site.
— Metals: Reuse. Hand over to the manager for recycling.
— Wood: Use for scaffolding and fences. Recycle for the manufacture of chipboard soles.
— Packaging: Use pallets as pallets or auxiliary soles. Return to the provider for reuse

.

Keep track of the amounts and types of waste that are generated.

Negotiate with the supplier to accept the excess materials.


Correctly segregate the waste that is generated

Do not burn or bury the waste generated in the works. Have differentiated containers for the different types of waste that are generated on the site (hazardous and non-hazardous)

and offices.

Hazardous waste containers should be placed in a ventilated area, sheltered from the sun and rain and with the floor waterproofed. They must be properly labeled.

Both hazardous waste and packaging and materials (cloths, papers, clothes) contaminated with these products must be delivered in order to be managed by authorized managers.


Correctly segregate and handle hazardous waste

It should not be abandoned, poured or made uncontrolled deposits. It is necessary to incorporate control measures for hazardous waste landfills.


Hazardous waste reduction

Give preference to appliances that work with electrical energy over those that run on batteries that at the end of their useful life become dangerous.


The demolition of a building must be planned in advance in order to make efficient use of materials and reduce the amount of waste generated

It is important to assess the types of waste that will be generated, with an approximate estimate of quantities and the treatment they will receive.