Projection of polyurethane foam in CRG2010
Javier Fernández, from the federated company Construcciones y Reformas Galicia 2010, details in this interview how this waterproofing solution is being applied from his company.
POLYURETHANE FOAM
What is POLYURETHANE FOAM PROJECTION?
It is a high performance thermal insulator with a rigid closed/open cell polyurethane foam system applied by projection.
It is created by an exothermic reaction between two components: polyol and isocyanate. Applied with a spray gun in several layers, it provides thermal protection without joints. The field of application is varied and covers all types of residential, industrial and agricultural constructions. In addition, as a thermal insulation it has an expectation of use in excess of 50 years. During that time the insulator has saved much more energy than the fossil fuel used
to generate it.What are its main advantages?
Its main advantages are:
-Insulation without joints or cracks: the polyurethane applied by projection creates a continuous and joint-free layer, eliminating thermal bridges.Insulation for difficult places and geometries.
-The on-site creation of insulation by spraying a mixture of liquids eliminates the need to cut and fix parts
-Excellent adhesion to the substrate throughout its useful life, in addition to not requiring the use of glues, adhesives or other fixing systems for its installation, and maintains its high adhesion and insulation performance throughout the life of the building
-Extends the life of a building
-Maximum waterproofing on facades
-Perfect behavior against cracking
-Behavior to Fire
-Suitability for use guaranteed
-High dimensional stability
-Consistent thickness throughout its lifetime
How does Construcciones y Reformas Galicia 2010 work with this construction solution?
For the projection of polyurethane foam we have the factory* truck equipped for its correct operation. It consists of:
-High pressure spraying equipment with mixing gun, heated hoses and product stirrer
-Electric compressor
-Autonomous breathing equipment for each applicator
-EPI'S: protective material
-Generator set to obtain total autonomy
The application is by means of a specific spraying equipment, with a control system of temperature and outlet pressure of products, which avoids possible failures in the composition of the mixture of these. Our materials are of first quality and the operators are professionally qualified as the company that has the certificates to be able to carry out the work. Our experience as a Polyurethane applicator guarantees at all times the quality of the same and its
application.